GP8512.store() Causes Reset

[Basitadam]

Hi,
With an ESP32-S3 mcu, strore() command causes
"Guru Meditation Error: Core 1 panic'ed (Interrupt wdt timeout on CPU1)."

And the value is not stored also

Other commands in GP8512outputData.ino sketch works OK.

I am on W10, Arduino IDE 2.3.4 with ESP board lib 3.1.2

Any ideas?
Thanks

[Basitadam]

Managed to make it work. If anyone needs:

1- For store command to work (assuming GPIO5 and GPIO6 used for I2C):
Before
#include <DFRobot_GP8XXX.h>
line add:

   #define SDA 6
   #define SCL 5

First line in setup add:

   void setup() 
   {
     Wire.begin(SDA,SCL);        //SDA,SCL 

2- To avoid resetting, in "DFRobot_GP8XXX.cpp" file modify:

void DFRobot_GP8XXX_IIC::store(void)
{
	
/*	
  #if defined(ESP32)
     _pWire->~TwoWire();
  #elif !defined(ESP8266)
    _pWire->end();
  #endif
*/
  
   #if !defined(ESP8266)
     _pWire->end();
   #endif

There might be a cleaner way to do it