About T40 and solar cameras

[ortegafernando]

Hi, I have found several solar cameras with Ingenic T40. Does anyone know if any of them is supported? Thanks.

https://www.unifore.net/item/sqw-2.html
https://www.unifore.net/tag/ingenic-t40.html

[tERB00]

T40 SOC is supported, but the rest of the camera is up to you to figure out. The wifi chip, gpio pins for the motors, ircut, white light and so on.

[ortegafernando]

T40 SOC is supported, but the rest of the camera is up to you to figure out. The wifi chip, gpio pins for the motors, ircut, white light and so on.

Thanks tERB00, I think this will be difficult for me.

Just another question. I have opened a dual camera Lenovo X6T (al least the easier len to open) and I see a INGENIC T40NN SOC, could be another one inside the upper len? I am trying to find how to get access to upper part inside pcb.

[tERB00]

Yes, examining a serial console is the easiest way to determine a correct SOC.
Also dual sensor cams are not supported by Openipc at the moment.

[ortegafernando]

Yes, examining a serial console is the easiest way to determine a correct SOC. Also dual sensor cams are not supported by Openipc at the moment.

Thanks. And.... even with dual sensor ... if I flash the firmware could I use one or it will be totally useless?

[tERB00]

Yes, one sensor will be working but you can't choose which one

[ortegafernando]

Yes, one sensor will be working but you can't choose which one

Thanks a lot i will investigate more. First try to open all. I can also see some "test points" in pcb but without any text to identify. If anyone want me to investigate in Lenovo X6T and you/anyone could help me step by step (with calm) we can try to go further. Thanks