-
Notifications
You must be signed in to change notification settings - Fork 134
Open
Description
getting this error "CAM: mpeg_pmt_section_codec parsing error"
MuMuDVB Version 2.1.0
--- Build information ---
Built with CAM support.
Built without SCAM support.
Built with ATSC support.
Built with ATSC long channel names support.
Built with support for DVB API Version 5.11.
Built with support for DVB-T2.
---------
Originally based on dvbstream 0.6 by (C) Dave Chapman 2001-2004
Released under the GPL.
Latest version available from http://mumudvb.net/
Project from the cr@ns (http://www.crans.org)
by Brice DUBOST ([email protected])
Info: CAM: You have enabled the support for conditional access modules (scrambled channels).
Info: Main: Autoconfiguration, we activate SAP announces. if you want to disable them see the README.
Info: Main: Autoconfiguration, we activate PAT rewriting. if you want to disable it see the README.
Info: Main: Autoconfiguration, we activate SDT rewriting. if you want to disable it see the README.
Info: Main: ========== End of configuration, MuMuDVB version 2.1.0 is starting ==========
Info: Main: Streaming. Freq 12034000.000000
Info: Tune: Using DVB card "ST STV0910" tuner 0
Info: Tune: Tuning DVB-S to Freq: 1434000 kHz, Transp frequency: 12034000.000000 , LO frequency 10600000 kHz Pol:H Srate=27500000, LNB number: 0
Info: Tune: LNB voltage 18V
Info: Tune: Sending DISEQC
Info: Tune: DISEQC: Setting Tone OFF
Info: Tune: DISEQC: Setting Voltage and wait 15 ms
Info: Tune: DISEQC: Send CMD and wait 15 ms
Info: Tune: DISEQC: Send BURST and wait 15 ms
Info: Tune: DISEQC: Set TONE back and wait 15 ms
Info: Tune: DISEQC SETTING SUCCEEDED - Frequency: 1434000
Info: Tune: FE_STATUS:
Info: Tune: FE_STATUS:
Info: Tune: FE_HAS_SIGNAL : found something above the noise level
Info: Tune: FE_HAS_CARRIER : found a DVB signal
Info: Tune: FE_HAS_VITERBI : FEC is stable
Info: Tune: FE_HAS_SYNC : found sync bytes
Info: Tune: FE_HAS_LOCK : everything's working...
Info: Tune: Event: Frequency: 12034000 (or 9166000)
Info: Tune: SymbolRate: 27499090
Info: Tune: FEC_inner: 5
Info: Main: Card 0, tuner 0 tuned
main 0x55905a85fa60
WARN: DVB: An issue happened during the IOCTLS to take BER measurements error: Unknown error 524
WARN: DVB: An issue happened during the IOCTLS to take strength measurements error: Unknown error 524
WARN: DVB: An issue happened during the IOCTLS to take SNR measurements error: Unknown error 524
WARN: DVB: An issue happened during the IOCTLS to take uncorrected blocks measurements error: Unknown error 524
Info: Common chan: Looking through all services to update their filters
Info: Unicast: We open the Master http socket for address 20.20.20.201:8005
Info: Autoconf: Autoconfiguration is now ready to work for you !
Info: Autoconf: The PAT version changed, channels have changed
Info: Autoconf: New PAT we force SDT update after all sections seen
WARN: Autoconf: Channel 0 SID 700 Force PMT update
WARN: Autoconf: Channel 1 SID 701 Force PMT update
WARN: Autoconf: Channel 2 SID 703 Force PMT update
WARN: Autoconf: Channel 3 SID 705 Force PMT update
WARN: Autoconf: Channel 4 SID 706 Force PMT update
WARN: Autoconf: Channel 5 SID 708 Force PMT update
WARN: Autoconf: Channel 6 SID 709 Force PMT update
WARN: Autoconf: Channel 7 SID 713 Force PMT update
WARN: Autoconf: Channel 8 SID 714 Force PMT update
WARN: Autoconf: Channel 9 SID 721 Force PMT update
WARN: Autoconf: Channel 10 SID 730 Force PMT update
WARN: Autoconf: Channel 11 SID 734 Force PMT update
WARN: Autoconf: Channel 12 SID 738 Force PMT update
WARN: Autoconf: Channel 13 SID 766 Force PMT update
WARN: Autoconf: Channel 14 SID 790 Force PMT update
WARN: Autoconf: Channel 15 SID 803 Force PMT update
WARN: Autoconf: Channel 16 SID 805 Force PMT update
WARN: Autoconf: Channel 17 SID 809 Force PMT update
WARN: Autoconf: Channel 18 SID 828 Force PMT update
WARN: Autoconf: Channel 19 SID 830 Force PMT update
Info: Autoconf: The CAT version changed
Info: Autoconf: New CAT we force SDT update after all sections seen
Info: Autoconf: The SDT version changed, channels description have changed
Info: Autoconf: We update the channel names
Info: Autoconf: We update the channel status
Info: Autoconf: Looking through all channels to see if they are ready for streaming
Info: Autoconf: We update the channel filters
Info: Common chan: Looking through all services to update their filters
Info: Autoconf: We update the channel networking
Info: Common chan: We open the channel 4 multicast IPv4 socket address 20.20.20.224:3005
Info: Autoconf: !!!!Unknown stream type : 0x00, PID : 131 cf ITU-T Rec. H.222.0 | ISO/IEC 13818
Info: Common chan: Looking through all services to update their filters
Info: Autoconf: We update the channel CAM support
Info: Autoconf: Diffusion 1 channels
Info: Autoconf: Channel number : 4, service id 706 name : "Aflam 1"
Info: Autoconf: Multicast4 ip : 20.20.20.224:3005
Info: Autoconf: Unicast : Channel accessible via the master connection, 20.20.20.201:8005
Info: Main: Channel "Aflam 1" is now highly scrambled (96% of scrambled packets). Card 0
Info: Autoconf: The NIT version changed, channels number could have changed !
Info: CAM: CAM Application type: 01
Info: CAM: CAM Application manufacturer: 4a60
Info: CAM: CAM Manufacturer code: 0001
Info: CAM: CAM Menu string: IRDETO CAM PRO
WARN: CAM: mpeg_pmt_section_codec parsing error
Info: Autoconf: We got the NIT, we update the channel names
Metadata
Metadata
Assignees
Labels
No labels