debian13上错误

[xuxin1955]

[garywill]

Did you try with --no-virt?

[xuxin1955]

root@4G-wifi:# /usr/bin/lnxrouter --ap wlxe025b6f0700f ImmortaIWrt -p 1234567890 --freq-band 5 -c 48 --wifi4 --wifi5 --ht-capab "[HT40+][SHORT-GI-40]" --vht-capab "[VHT80][SHORT-GI-80]" --isolate-clients --country CN --no-virt --daemon
Running as Daemon...
root@4G-wifi:# WARN: wlxe025b6f0700f has 15 characters which might be too long. If AP doesn't work, see --virt-name and #44
linux-router 0.8.1 (https://github.com/garywill/linux-router)
Released under LGPL, with no warranty. Use on your own risk.

PID: 555
Target interface is wlxe025b6f0700f (42:3d:fa:a8:78:ce)
unknown

Use random LAN IPv4 address 192.168.40.1
Config dir: /dev/shm/lnxrouter_tmp/lnxrouter.wlxe025b6f0700f.conf.B213E0
Freq band: 5 GHz Channel: 48
Set wlxe025b6f0700f unmanaged by NetworkManager

iptables v1.8.11 (legacy)
Notice: Not showing all operations done to iptables rules

haveged_watchdog PID: 684

Starting hostapd
hostapd PID: 689
WARN: Low entropy detected. We recommend you to install `haveged'
Configuration file: /dev/shm/lnxrouter_tmp/lnxrouter.wlxe025b6f0700f.conf.B213E0/hostapd.conf
Line 18: unknown configuration item 'ieee80211n'
Line 19: unknown configuration item 'ht_capab'
Line 20: unknown configuration item 'ieee80211ac'
Line 21: unknown configuration item 'vht_capab'
Line 22: unknown configuration item 'vht_oper_chwidth'
5 errors found in configuration file '/dev/shm/lnxrouter_tmp/lnxrouter.wlxe025b6f0700f.conf.B213E0/hostapd.conf'
Failed to set up interface with /dev/shm/lnxrouter_tmp/lnxrouter.wlxe025b6f0700f.conf.B213E0/hostapd.conf
Failed to initialize interface

iptables: NAT
MASQUERADE all opt -- in * out !wlxe025b6f0700f 192.168.40.0/24 !-> 192.168.40.0/24 /* lrt555wlxe025b6f0700f /
ACCEPT all opt -- in wlxe025b6f0700f out * 192.168.40.0/24 -> 0.0.0.0/0 / lrt555wlxe025b6f0700f /
ACCEPT all opt -- in * out wlxe025b6f0700f 0.0.0.0/0 -> 192.168.40.0/24 / lrt555wlxe025b6f0700f */
Loaded kernel module nf_nat_pptp

iptables: allow DNS
ACCEPT tcp opt -- in wlxe025b6f0700f out * 192.168.40.0/24 -> 192.168.40.1 tcp dpt:53 /* lrt555wlxe025b6f0700f /
ACCEPT udp opt -- in wlxe025b6f0700f out * 192.168.40.0/24 -> 192.168.40.1 udp dpt:53 / lrt555wlxe025b6f0700f */

iptables: allow dhcp
ACCEPT udp opt -- in wlxe025b6f0700f out * 0.0.0.0/0 -> 0.0.0.0/0 udp dpt:67 /* lrt555wlxe025b6f0700f */

Starting dnsmasq
Oct 22 20:45:03 dnsmasq[714]: started, version 2.91 cachesize 150
Oct 22 20:45:03 dnsmasq[714]: compile time options: IPv6 GNU-getopt DBus no-UBus i18n IDN2 DHCP DHCPv6 no-Lua TFTP conntrack ipset nftset auth DNSSEC loop-detect inotify dumpfile
Oct 22 20:45:03 dnsmasq-dhcp[714]: DHCP, IP range 192.168.40.10 -- 192.168.40.250, lease time 1h
Oct 22 20:45:03 dnsmasq-dhcp[714]: DHCP, sockets bound exclusively to interface wlxe025b6f0700f
Oct 22 20:45:03 dnsmasq[714]: reading /etc/resolv.conf
Oct 22 20:45:03 dnsmasq[714]: using nameserver 192.168.66.1#53
Oct 22 20:45:03 dnsmasq[714]: using nameserver 2409:8080:2000:3::1#53
Oct 22 20:45:03 dnsmasq[714]: using nameserver 2409:8080:2000:3::2#53
Oct 22 20:45:03 dnsmasq[714]: cleared cache
dnsmasq PID: 714

== Setting up completed, now linux-router should be working ==
Error occured

ERROR: hostapd failed. (tip: try '--hostapd-debug' to get some debug info)

Error occured

Doing cleanup..
Oct 22 20:45:11 dnsmasq[714]: exiting on receipt of SIGTERM
Killed dnsmasq.pid 714 dnsmasq
Terminated
Killed haveged_watchdog.pid 684 lnxrouter
Terminated
Killed keep_running.pid 736 bash
Undoing iptables changes ..
Restoring wlxe025b6f0700f to old MAC address 42:3d:fa:a8:78:ce ...
root@4G-wifi:~# Restore wlxe025b6f0700f managed by NetworkManager
Error occured

ERROR: dnsmasq failed

Exiting: This is the only running instance
Cleaning up done
root@4G-wifi:#
root@4G-wifi:#

[garywill]

log里已经有两个提示

WARN: wlxe025b6f0700f has 15 characters which might be too long. If AP doesn't work, see --virt-name and https://github.com/garywill/linux-router/issues/44

尝试修改系统里网络介面的命名方式让名称短一点，请自行网上搜索方法，要重启

ERROR: hostapd failed. (tip: try '--hostapd-debug' to get some debug info)

这条也请先自行排查