[board] Rename systemClock -> SystemClock

Author: salkinium

docs/src/guide/cookbook.md

@@ -35,7 +35,7 @@ using Uart = Uart0;
 // connect both pins with a pullup on the Rx
 Uart::connect<GpioOutputD1::Tx, GpioInputD0::Rx>(Gpio::InputType::PullUp);
 // initialize to 115.2kBaud from the BSP clock configuration
-Uart::initialize<Board::systemClock, 115200_Bd>();
+Uart::initialize<Board::SystemClock, 115200_Bd>();
 
 Uart::write('H');  // Ohai there
 Uart::write('i');
@@ -59,7 +59,7 @@ modm::IODeviceWrapper<Uart> device;
 modm::IOStream stream(device);
 
 Uart::connect<GpioOutputD1::Tx>();
-Uart::initialize<Board::systemClock, 115200_Bd>();
+Uart::initialize<Board::SystemClock, 115200_Bd>();
 
 // similar to std::ostream but without formatting features
 stream << 42 << " is a nice number!" << modm::endl;

docs/src/how-modm-works.md

@@ -259,8 +259,8 @@ for keeping code size in check on very resource constrained targets, like the AV
 
 ```cpp
 Uart4::connect<GpioA0::Tx, GpioA1::Rx>(Gpio::InputType::PullUp); // pull-up in RX pin
-Uart4::initialize<Board::systemClock, 115'200_Bd>(); // Within 1% default tolerance
-Uart4::initialize<Board::systemClock, 115'200_Bd> Tolerance::Exact>();
+Uart4::initialize<Board::SystemClock, 115'200_Bd>(); // Within 1% default tolerance
+Uart4::initialize<Board::SystemClock, 115'200_Bd> Tolerance::Exact>();
 // error: The closest available baudrate exceeds the tolerance of the requested baudrate!
 ```
 
@@ -320,7 +320,7 @@ using GpioExpander = modm::Mcp23x17< Transport >;
 GpioExpander expander;
 // Connect and initialize the peripherals
 SpiMaster1::connect<GpioA0::Sck, GpioA1::Mosi, GpioA2::Miso>();
-SpiMaster1::initialize<Board::systemClock, 1MHz>();
+SpiMaster1::initialize<Board::SystemClock, 1MHz>();
 expander.initialize();
 // Bind the expander pins to a simpler name
 using Pin0 = GpioExpander::P0< expander >;

examples/arduino_uno/basic/analog_read_serial/main.cpp

@@ -24,7 +24,7 @@ main()
 	// Initialize the analog to digital converter
 	// With the AVR running at 16Mhz and a prescaler of 128 the
 	// ADC is running at 125kHz.
-	Adc::initialize<Board::systemClock, 125_kHz>();
+	Adc::initialize<Board::SystemClock, 125_kHz>();
 	Adc::setReference(Adc::Reference::InternalVcc);
 
 	while (1)

examples/arduino_uno/basic/read_analog_voltage/main.cpp

@@ -24,7 +24,7 @@ main()
 	// Initialize the analog to digital converter
 	// With the AVR running at 16Mhz and a prescaler of 128 the
 	// ADC is running at 125kHz.
-	Adc::initialize<Board::systemClock, 125_kHz>();
+	Adc::initialize<Board::SystemClock, 125_kHz>();
 	Adc::setReference(Adc::Reference::InternalVcc);
 
 	while (1)

examples/avr/1-wire/ds18b20/main.cpp

@@ -24,9 +24,8 @@ using OneWireMaster = BitBangOneWireMaster<OneWirePin>;
 int
 main()
 {
-	using systemClock = SystemClock;
 	Uart0::connect<GpioD1::Txd, GpioD0::Rxd>();
-	Uart0::initialize<systemClock, 9600_Bd>();
+	Uart0::initialize<SystemClock, 9600_Bd>();
 
 	// Enable interrupts, this is needed for every buffered UART
 	enableInterrupts();

examples/avr/adc/basic/main.cpp

@@ -16,14 +16,13 @@
 
 using namespace modm::platform;
 using namespace modm::literals;
-using systemClock = SystemClock;
 
 int
 main()
 {
 	// Create a new UART object and configure it to a baudrate of 115200
 	Uart0::connect<GpioOutputD1::Txd, GpioInputD0::Rxd>();
-	Uart0::initialize<systemClock, 115200_Bd>();
+	Uart0::initialize<SystemClock, 115200_Bd>();
 
 	// Enable interrupts, this is needed for every buffered UART
 	enableInterrupts();
@@ -37,7 +36,7 @@ main()
 	// Initialize the analog to digital converter
 	// With the AVR running at 14.7456Mhz and a prescaler of 128 the
 	// ADC is running at 115kHz.
-	Adc::initialize<systemClock, 115_kHz>();
+	Adc::initialize<SystemClock, 115_kHz>();
 	Adc::setReference(Adc::Reference::InternalVcc);
 
 	// read the value of channel 0 (=> ADC0 => PA0) and wait until

examples/avr/adc/oversample/main.cpp

@@ -17,7 +17,6 @@ using namespace modm::platform;
 using namespace modm::literals;
 
 // Create a new UART object
-using systemClock = SystemClock;
 
 #include <modm/io/iostream.hpp>
 // Create a IOStream for complex formatting tasks
@@ -39,12 +38,12 @@ int
 main()
 {
 	Uart0::connect<GpioOutputD1::Txd, GpioInputD0::Rxd>();
-	Uart0::initialize<systemClock, 115200_Bd>();
+	Uart0::initialize<SystemClock, 115200_Bd>();
 
 	// Initialize the analog to digital converter
 	// With the AVR running at 14.7456Mhz and a prescaler of 128 the
 	// ADC is running at 115kHz.
-	Adc::initialize<systemClock, 115_kHz>();
+	Adc::initialize<SystemClock, 115_kHz>();
 	Adc::setReference(Adc::Reference::InternalVcc);
 	Adc::enableInterrupt();
 

examples/avr/can/mcp2515/main.cpp

@@ -16,7 +16,6 @@
 
 using namespace modm::platform;
 using namespace modm::literals;
-using systemClock = SystemClock;
 
 typedef GpioOutputB4 Cs;
 typedef GpioInputB2 Int;
@@ -51,7 +50,7 @@ main()
 	// Initialize SPI interface and the other pins
 	// needed by the MCP2515
 	SPI::connect<Sclk::Sck, Mosi::Mosi, Miso::Miso>();
-	SPI::initialize<systemClock, 921.6_kHz>();
+	SPI::initialize<SystemClock, 921.6_kHz>();
 	Cs::setOutput();
 	Int::setInput(Gpio::InputType::PullUp);
 

examples/avr/can/mcp2515_uart/main.cpp

@@ -19,7 +19,6 @@
 
 using namespace modm::platform;
 using namespace modm::literals;
-using systemClock = SystemClock;
 
 typedef GpioOutputB0 LedGreen;
 typedef GpioOutputB1 LedRed;
@@ -70,7 +69,7 @@ main()
 	OCR2A = 230;
 
 	Uart0::connect<GpioD1::Txd, GpioD0::Rxd>();
-	Uart0::initialize<systemClock, 115200_Bd>();
+	Uart0::initialize<SystemClock, 115200_Bd>();
 
 	// Create a IOStream for complex formatting tasks
 	modm::IODeviceWrapper< Uart0, modm::IOBuffer::BlockIfFull > device;
@@ -84,7 +83,7 @@ main()
 	// Initialize SPI interface and the other pins
 	// needed by the MCP2515
 	SPI::connect<Sclk::BitBang, Mosi::BitBang, Miso::BitBang>();
-	SPI::initialize<systemClock, 1_MHz>();
+	SPI::initialize<SystemClock, 1_MHz>();
 	Cs::setOutput();
 	Int::setInput(Gpio::InputType::PullUp);
 

examples/avr/display/dogm128/benchmark/main.cpp

@@ -21,7 +21,6 @@
 using namespace modm::platform;
 using namespace modm::literals;
 
-using systemClock = SystemClock;
 
 namespace led
 {
@@ -65,7 +64,7 @@ setup()
 	led::B::setOutput();
 
 	lcd::SPI::connect<lcd::Sck::BitBang, lcd::Mosi::BitBang>();
-	lcd::SPI::initialize<systemClock, 2_MHz>();
+	lcd::SPI::initialize<SystemClock, 2_MHz>();
 
 	// timer initialization
 	// compare-match-interrupt every 1 ms at 14.7456 MHz