Bruce Release 1.11.1

Improvements

• Cardputer and Cardputer ADV now share the same binary file
• Added ADV pins into the pins options on IR and RF
• Added GPS>Config>GPS pins, to change rx/tx GPS pins
• Cardputer ADV comes with GPS Pins and Baudrate configured for the GPS/LoRa cap, to use the Grove GPS need to change to Rx=1 and Tx=2
• Added Config>Dev mode> {options to change I2C device pins, UART pins, GPS pins}

Fixes

• Fixed StickCPlus1 black screen issue

Donate/Support the project

Thanks to all Contributors ❤️

Bruce Release 1.11

WiFi

• Add support for Ethernet Card and refactor WiFi attacks to works with any esp-netif interface #1276 by @andreock
• Added Karma attack. #1478 by @7wp81x
• Resolve DNS on SSH connections #1560 by @sabbajohn
• Implementation of MAC Management and MAC Spoofing #1589 by @IncursioHack

RFID

• Support as BLE Reader for PN532/PN532Killer and Standalone Control of Emulator #1251 by @whywilson
• Improve PN532/PN532Killer UART #1555 by @whywilson
• Add I2C PN532 on top of M5STICK #1586 by @lshaf

Fixes

• Fix shared spi nrf,nrf jammer,add hopper.... #1573 by @smoochiee
• Sometimes CC1101 deinitialization crashes #1405 by @DevEclipse1
• FIX: sometimes CC1101 deinitialization crashes

Improvements

• Color storage + automatic getting colors and adding them #1327 by @Gosheto1234
• Enhancement for webInterface #1342 by @lshaf
• Use flag to build W5500 and pull pins from config #1371 by @andreock
• Web UI tweaks #1370 by @emericklaw
• LED and UI Colors #1423 by @emericklaw
• Navigator screen use binary #1431 by @lshaf
• Update CURRENT_YEAR at build time
• Remove _rtc.setWire(&Wire) from boards/m5stack-core2/interface.cpp
• A little improvement #1499 by @Helixoo
• Remove _rtc.setWire(&Wire) from boards/m5stack-core2/interface.cpp #1519 by @BarTenderNZ
• Keyboard code refactoring + HEX and Numpad keyboards + BACK button #1554 by @dddema

More devices Support

• Add Lilygo T-LoRa-Pager support by @emericklaw
• T-HMI port by @bmorcelli
• Cardputer ADV support 34aabec

Donate/Support the project

Thanks to all Contributors ❤️

lastRelease commit (8448ccb)

Placeholder for the files used in the webflasher

betaRelease commit (8448ccb)

Placeholder for the web page binaries and flash json files

Bruce Release 1.10.2

WiFi

• Enhanced Deauth+Clone+Verify
• Fixed Telnet screen Rotation issue

Files

• WebUI - Fixed Drag 'n drop not keeping the actual folder/fs after upload

Others

• Fix megalodon navigation and Touchscreen small issues

Fixes

• Fixed custom theme always set when set default (on restart it was restoring theme if on LittleFS)
• Brightness DimTime bug on T-Deck
• Fixed double enter detections on T-Deck
• Removed Charging indication for Cardputer, T-Deck and StickCPlus2, not working as expected
• Fixed stuck LongPress variable on StickCPluses
• Reduced "Booting" time considerably

Donate/Support the project

Thanks to all Contributors ❤️

Bruce Release 1.10.1

WiFi

• Fixed Custom Beacon Spam by @bmorcelli

BLE

• Fixed BadBLE and Media Commands that weren't working on StickCPluses and CYDs by @bmorcelli

RFID

• Reduced Felica timeout from 1000 to 100 ms, enhancing UX by @Hs1r1us

Interpreter

• Fixed loopOptions core function to work with DialogChoice JS function, refactoring the ir_brute, rf_brute and wifi_brute scripts by @bmorcelli

Others

• Fixed Mic Recording (restarting on Cardputer) and added timeless recorder by @DimDK .
• Added Orange Color to LED Control by @hynryx
• Added many other colors to the UI Colors by @Gosheto1234

Issues fixed

• Fixed boot sound that wasn't being ignored when disabled
• NRF24 Jammer modes strings overlapping on CYDs
• Mic Spectrum and Recorder not working on Cardputer

More devices Support

• Marauder Mini, v4, v6, v6.x, v7
• AWOK Touch v2 and Awok Mini v2 devboards (screen firmware)

Donate/Support the project

Thanks to all Contributors ❤️

Bruce Release 1.10

WiFi

• Added new wifi attack and QOL (better pr) #936 by @GabriWar

BLE

• Ninebot Scooter Tuning via BLE UART #1133 by @Sor3nt
• Added iBeacon/Airtag BLE and more #1201 by @eadmaster

IR

• Add Quick IR Setup Feature #906 by @pimentelleo
• IR Read: Fix save issue in Custom Read #1036 by @Lamnxzp
• Add Simple IR jammer #1101 by @Thoxy67

RF

• Sub-GHz Raw Recording app #931by @Pablo-Ortiz-Lopez
• RF module refactor #1054 by @rennancockles
• Added spectogram to subghz #1219 by @DevEclipse1
• Added listening to rf signals #1240 by @DevEclipse1

RFID

• Improve rfid read error message #970 by @rennancockles
• Add PN532Killer support via UART #1067 by @whywilson
• Add support to MFRC522 module #1086 by @rennancockles
• Dev #1131 by @rennancockles

Others

• USB Mass Storage #891 by @rennancockles
• Add double quotes to SSID name #894 by @henriquetorquato
• Add the ability to run WebUI in the background, and others #937 by @Tawank
• Added recording of microphone #1236 by @DevEclipse1

Fixes

• File selector fixes #886 by @Pablo-Ortiz-Lopez
• UI Theme among other things #941 by @bmorcelli
• Use a single RMT channel for LED control #957 by @Pablo-Ortiz-Lopez
• Remove unnesesary lambda, Remove std::regex, 110 kB saved #969 by @Tawank
• Fix build Lilygo T-Display-S3 #973 by @Tawank
• Code moving and small fixes #975 by @bmorcelli
• Reset image interval on manual navigation #986 by @unveroleone
• Async Webui and fixes #990 by @bmorcelli
• Lint Fixes #1016 by @rennancockles
• Make mainMenu handle escPress the same way it did before the refactor #1033 by @Pablo-Ortiz-Lopez
• Fix iButton write + some refactor iButton module #1048 by @Maksimius
• Fix rf spectrum #1055 by @rennancockles
• Fix some smoochie board #1071 by @smoochiee
• Dev #1072 by @rennancockles
• Fix loopSD rootPath not exist #1076 by @rennancockles
• Fix BLE initialization sequence in OpenHaystack to resolve ESP_ERR_IN… #1110 by @stefexec
• Bruce config pins #1140 by @rennancockles
• Fix for interpreter start for serial command #1171 by @Tawank
• Fix LilyGo T-Embed CC1101 deepsleep #1175 by @andreock
• Fixed raw subghz record reboot issue #1188 by @DevEclipse1
• Fixed #1155 #1194 by @Hs1r1us

Improvements

• Little speed optimisations of boot #884 by @Tawank
• Cardputer Keyboard enhancement, (all) BLE Pairing fix #907 by @bmorcelli
• Dev #920 by @rennancockles
• BLE improvements #966 by @bmorcelli
• Charging indicator + ble spam (better PR) #980 by @GabriWar
• Create new profiles for quick remote setup and get rid of * char lists #981 by @pimentelleo
• Change 'const char*' to String in loopOptions #984 by @Tawank
• Theme code maintenability #998 by @bmorcelli
• Refactor MainMenu to use loopOptions #999 by @Pablo-Ortiz-Lopez
• Organizing files #1023 by @bmorcelli
• Change dialog module to gui in JS, Fix dino_game for t-embed #1040 by @Tawank
• BadUSB/BLE refactor #1058 by @bmorcelli
• Sd mmc Support #1069 by @bmorcelli
• Slovenian keyboard layout support added #1078 by @rustysun9
• Add FeliCa support #1082 by @andreock
• Update lilygo T-Watch-S3 interface. initial touch as polling mode #1083 by @jimmy899
• Spi connection pins #1087 #1089 #1090 by @rennancockles
• Update powerSave.cpp #1107 by @Gosheto1234
• Update BleMenu Logo #1109 by @Alema1
• Adjust the internal triangles to fit the same line width as other logo lines on the Bluetooth logo #1117 by @Alema1
• Add exit menu to OpenHaystack module #1119 by @stefexec
• Play audio files from the webui and some fixes #1177 by @eadmaster
• Improve energy consumption during DeepSleep for T-Embed CC1101 #1179 by @andreock
• Serial cmds refactorings and fixes #1208 by @eadmaster
• Feature/support cuid #1239 by @Hs1r1us
• Feature/T-Embed-C1101 now supports setting custom battery capacity. #1232 by @Hs1r1us

More devices Support

• Lilygo T-Watch S3 port and RTC lib adaptation #901 by @bmorcelli
• Enable otg when using ir..added led..buzzer on smoochie board #1062 by @smoochiee
• Phantom fix #1206 by @x01rrr

Thanks for 10k members on official discord!

This community is amazing!

Donate/Support the project

Thanks to all Contributors ❤️

Bruce Release 1.9.1

RF

• RF Scan/Copy improvements #878 by @Pablo-Ortiz-Lopez

NRF24

• New Jammer modes and channel select #871 by @x01rrr

Fixes

• Fix/Remove some warnings during building #869 by @Tawank
• CC1101 fix for Cardputer, CYD and sticks 3b51bf2

Improvements

• Make custom rf open inside BruceRF folder #874 by @rennancockles
• Add script to gzip web_interface files #870 by @Tawank

Donate/Support the project

Thanks to all Contributors ❤️

Bruce Release 1.9

IR

• Add Kaseikyo Protocol (Custom IR) #757 by @Lamnxzp
• A better way to save IR devices #793 by @varenichek22
• Fix SIRC20 Protocol (Custom IR) #833 by @Lamnxzp

Fixes

• Fix wifi_brute.js script #775 by @Lamnxzp
• Fix taskInputHandler, remove blocking delay, optimisations #795 by @Tawank
• Fix strcmp in display.cpp #814 by @Tawank

Improvements

• Add BLE Name & WiFi AP Credentials Settings #765 by @Lamnxzp
• Update net_utils.cpp #767 by @7wp81x
• Allow WebUI as a startup app #768 by @jordemort
• Add read cooldown to allow card removal in Chameleon module #780 by @bruno-1337
• Add NRF24 support for T-Display S3 board #809 by @epiHATR
• Add warnings and optimize flag to compiler and monitor_speed to platformio.ini #810 by @Tawank
• Add progress display in Scan Hosts #812 by @GameOneDev
• Add IR Tx Repeats support, fix IR on Serial Cmds #821 by @Lamnxzp
• W328R and S024R port, Invert color option #822 by @bmorcelli
• Customizable SPI bus pins for CC1101, SDCard and NRF24 #856 by @bmorcelli
• About device improvements f3dccdb

Donate/Support the project

Thanks to all Contributors ❤️

Bruce Release 1.8.2

Fixes

• Fix SDcard mount error #707 by @7wp81x
• Fix raw sniffer not writing to SDCard CYD #728 by @7wp81x
• Cplus1 prev button 3c16c93
• 1.8.1 fixes #743 by @bmorcelli
• Small changes in custom_ir.cpp #718 by @Tawank

Improvements

• Add t-display s3 power off menu item #716 by @epiHATR
• Added text editor for WebUi #741 by @AZachia
• Change file allocation in serialcmds to dynamic, Refractor js engine #742 by @Tawank
• Implement error handling / quitting of "Listen TCP" #755 by @schuellerf

Donate/Support the project

Thanks to all Contributors ❤️