Refactor BSP module with dependency inversion and iterators

examples/adjacency_demo.rs

@@ -145,10 +145,24 @@ fn main() {
     // Demonstrate adaptive refinement
     println!("\n7. Adaptive mesh refinement:");
     let refined = tessellated.adaptive_refine(0.5, 2.0, 15.0);
-    let (refined_vertex_map, refined_adjacency_map) = refined.build_connectivity();
     println!("   Original triangles: {}", tessellated.polygons.len());
     println!("   After refinement: {}", refined.polygons.len());
 
+    // Re-analyze connectivity to show changes
+    let (refined_vertex_map, refined_adjacency_map) = refined.build_connectivity();
+    let refined_avg_valence = if !refined_adjacency_map.is_empty() {
+        refined_adjacency_map.values().map(|v| v.len()).sum::<usize>() as Real
+            / refined_adjacency_map.len() as Real
+    } else {
+        0.0
+    };
+
+    println!(
+        "   Refined unique vertices: {}",
+        refined_vertex_map.vertex_count()
+    );
+    println!("   Refined average valence: {:.2}", refined_avg_valence);
+
     if refined.polygons.len() > tessellated.polygons.len() {
         println!("   ✓ Mesh was refined based on quality criteria");
     } else {

src/io/stl.rs

@@ -406,7 +406,6 @@ impl<S: Clone + Debug + Send + Sync> Sketch<S> {
             }
         }
 
-        //
         // (C) Encode into a binary STL buffer
         //
         let mut cursor = Cursor::new(Vec::new());

src/lib.rs

@@ -3,7 +3,6 @@
 //!
 //! ![Example CSG output][Example CSG output]
 #![cfg_attr(doc, doc = doc_image_embed::embed_image!("Example CSG output", "docs/csg.png"))]
-//!
 //! # Features
 //! #### Default
 //! - **f64**: use f64 as Real

src/main.rs

@@ -252,7 +252,7 @@ fn main() {
         let ray_origin = Point3::new(0.0, 0.0, -5.0);
         let ray_dir = Vector3::new(0.0, 0.0, 1.0); // pointing along +Z
         let hits = cube.ray_intersections(&ray_origin, &ray_dir);
-        println!("Ray hits on the cube: {:?}", hits);
+        println!("Ray hits on the cube: {hits:?}");
     }
 
     // 12) Polyhedron example (simple tetrahedron):
@@ -297,9 +297,9 @@ fn main() {
 
     // 14) Mass properties (just printing them)
     let (mass, com, principal_frame) = cube.mass_properties(1.0);
-    println!("Cube mass = {}", mass);
-    println!("Cube center of mass = {:?}", com);
-    println!("Cube principal inertia local frame = {:?}", principal_frame);
+    println!("Cube mass = {mass}");
+    println!("Cube center of mass = {com:?}");
+    println!("Cube principal inertia local frame = {principal_frame:?}");
 
     // 1) Create a cube from (-1,-1,-1) to (+1,+1,+1)
     //    (By default, CSG::cube(None) is from -1..+1 if the "radius" is [1,1,1].)
@@ -349,11 +349,11 @@ fn main() {
         );
     }
 
-    //let poor_geometry_shape = moved_cube.difference(&sphere);
+    // let poor_geometry_shape = moved_cube.difference(&sphere);
     //#[cfg(feature = "earclip-io")]
-    //let retriangulated_shape = poor_geometry_shape.triangulate_earclip();
+    // let retriangulated_shape = poor_geometry_shape.triangulate_earclip();
     //#[cfg(all(feature = "earclip-io", feature = "stl-io"))]
-    //let _ = fs::write("stl/retriangulated.stl", retriangulated_shape.to_stl_binary("retriangulated").unwrap());
+    // let _ = fs::write("stl/retriangulated.stl", retriangulated_shape.to_stl_binary("retriangulated").unwrap());
 
     let sphere_test = Mesh::sphere(1.0, 16, 8, None);
     let cube_test = Mesh::cube(1.0, None);
@@ -724,8 +724,8 @@ fn main() {
         let _ = fs::write("stl/octahedron.stl", oct.to_stl_ascii("octahedron"));
     }
 
-    //let dodec = CSG::dodecahedron(15.0, None);
-    //let _ = fs::write("stl/dodecahedron.stl", dodec.to_stl_ascii(""));
+    // let dodec = CSG::dodecahedron(15.0, None);
+    // let _ = fs::write("stl/dodecahedron.stl", dodec.to_stl_ascii(""));
 
     #[cfg(feature = "stl-io")]
     {
@@ -1041,19 +1041,17 @@ fn main() {
         );
     }
 
-    /*
-    let helical = CSG::helical_involute_gear(
-        2.0,   // module
-        20,    // z
-        20.0,  // pressure angle
-        0.05, 0.02, 14,
-        25.0,   // face-width
-        15.0,   // helix angle β [deg]
-        40,     // axial slices (resolution of the twist)
-        None,
-    );
-    let _ = fs::write("stl/helical.stl", helical.to_stl_ascii("helical"));
-    */
+    // let helical = CSG::helical_involute_gear(
+    // 2.0,   // module
+    // 20,    // z
+    // 20.0,  // pressure angle
+    // 0.05, 0.02, 14,
+    // 25.0,   // face-width
+    // 15.0,   // helix angle β [deg]
+    // 40,     // axial slices (resolution of the twist)
+    // None,
+    // );
+    // let _ = fs::write("stl/helical.stl", helical.to_stl_ascii("helical"));
 
     // Bézier curve demo
     #[cfg(feature = "stl-io")]
@@ -1081,8 +1079,10 @@ fn main() {
         let bspline_ctrl = &[[0.0, 0.0], [1.0, 2.5], [3.0, 3.0], [5.0, 0.0], [6.0, -1.5]];
         let bspline_2d = Sketch::bspline(
             bspline_ctrl,
-            /* degree p = */ 3,
-            /* seg/span */ 32,
+            // degree p =
+            3,
+            // seg/span
+            32,
             None,
         );
         let _ = fs::write("stl/bspline_2d.stl", bspline_2d.to_stl_ascii("bspline_2d"));
@@ -1092,8 +1092,8 @@ fn main() {
     println!("{:#?}", bezier_3d.to_bevy_mesh());
 
     // a quick thickening just like the Bézier
-    //let bspline_3d = bspline_2d.extrude(0.25);
-    //let _ = fs::write(
+    // let bspline_3d = bspline_2d.extrude(0.25);
+    // let _ = fs::write(
     //    "stl/bspline_extruded.stl",
     //    bspline_3d.to_stl_ascii("bspline_extruded"),
     //);